Magnetic Hex Coasters (w/ Project Files)

CNC
IMG_1472.jpg

IMG_1472A simple drink coaster that provides simple entertainment at the table, and can be customized with engraving or laser etching. Carve two halves from provided SVG file and glue together. Center pocket can be milled out for weight reduction, and minimizing the effects of bowed stock material. Mill magnet pockets to depth of 0.5 mm more than 1/2 the diameter of the magnets you are using (they need a little wiggle room).You will need...Wood sheets, 1/4" or less, but at least 1/8" thick.Spherical magnets, 3/16" or ~5 mm.SVG Files:Hex Coaster 12mHex coaster 6mSee this project in action:

Previous
Previous

DIY Camera Slider Plans, v3.3 (Experimental)

Next
Next

DIY Tyvek Wallet Template